Quick Start Guide — Fusion Studio
This guide is for Neat Video v4 plug-in for OFX hosts being used with Fusion Studio 7.
If you use another Neat Video plug-in or another editing application, please select the corresponding quick start guide.
1. Installing the plug-in
To install the Neat Video OFX plug-in:
Make sure you have started Fusion Studio at least once before installing the plug-in.
If you have not done that yet, start Fusion Studio and exit it.
- Download the installer of Neat Video for OFX hosts:
- If you already purchased the product and have a current license for the Pro plug-in, please download the Pro plug-in from My Products page
- If you want to try Neat Video before purchase, please download the Demo plug-in from Download page
- Start the installer:
Double-click the downloaded EXE file to start the installer
For Mac OS X:
a. Double-click the downloaded DMG file to mount the volume
b. In the mounted volume, double-click NeatVideoOFX.Intel.pkg to start the installer
(you may be prompted to enter the Name / Password of the OSX administrator account)
Proceed through the steps of the installation process. Use the default settings offered
by the installer.
- Start Fusion Studio and find Neat Video > Reduce Noise v4 in Tools list.
In case the plug-in has not become available in Fusion Studio, please contact Neat Video support for assistance.
2. Running Neat Video on a sample video clip
Please download the test-kit prepared to help you start using Neat Video. Having downloaded, please unzip it to a new folder on the hard disk.
The test-kit includes a sample video clip: SampleClip.mp4. This is a typical video clip captured by a digital video camera in high-gain mode. Some technical information about the sample clip is available in the SampleClipInfo.txt file.
Please start Fusion Studio and go through the steps below to clean the clip using Neat Video.
2.1. Add the sample clip to the composition
1. Configure a new composition in Fusion Studio
Go to File > New to create a compositoin.
2. Add the sample clip file to the Composition
- Go to File > Import > Footage... and navigate to the folder with input clip, select SampleClip.mp4.
- Double-click the file and a node with the sample clip will appear in the Flow panel in the bottom of the main window of Fusion Studio.
- Drag-n-drop the “SampleClip…” node from the Flow area into the left viewer area of Fusion Studio (this will show preview of the clip in that viewer area).
The Fusion Studio preview window will display the sample clip and you will see that there
is strong noise in it. The task of Neat Video is to reduce this noise.
2.2. Add Neat Video to the composition
- Click a node with the sample clip.
- Open the Tools menu and find Neat Video > Reduce Noise v4:
- Click the Reduce Noise v4 button in the Tools list. This will add a node with ReduceNoise v4 in the Flow in the bottom of the main window of Fusion Studio.
- Select a frame for noise analysis using the timeline selector.
In the Tools panel, click the Prepare Noise
Profile button. This will open the main window of Neat Video
plug-in and display the current frame from the
(If you run the Demo plug-in, click OK in the popup splash screen of the plug-in to proceed further).
2.3. Configure Neat Video
1. Specify the scan type
At this point Neat Video will ask to specify the scan type of the clip. Please select Progressive.
2. Build a noise profile for the clip
To reduce noise in this frame and in the whole clip, Neat Video generally needs a noise profile describing the noise properties of the clip. You can prepare such a profile using the Auto Profile function:
In the Device Noise Profile tab click
Neat Video will then automatically analyze the noise to build a new noise profile:
- Visually inspect the selected area — it should contain no visible details, only noise; otherwise the noise profile and subsequent noise reduction may be inaccurate.
If the selected area does contain any details, move the selection to a featureless area or simply draw a new selection in such an area (the selection must be at least 32x32 pixels large). Then click the Auto Profile button again.
- After that Neat Video is ready to filter the clip.
3. Check Preview
- Switch to the Noise Filter Settings tab
You will notice that Neat Video has already applied noise reduction based on the default filter settings and the preview shows a clearly visible difference: there is less noise than in the original frame.
You can try to adjust the filter settings and see how that affects the results. For example, try to adjust the Temporal Filter > Radius setting (in the Temporal tab in the Filter Settings box in the right part of the window) from 2 to 1 or to a higher value. This will apply weaker or stronger temporal noise reduction to the frame.
4. Apply the changes
- Click in the bottom of the plug-in window.
Neat Video will save the current settings and close its main window.
(If you run the Demo plug-in, it will also describe the limitations of the Demo version at this point).
Once this step is completed and Neat Video window is closed, the filter is ready for work.
- Drag-n-drop the ReduceNoise v4 node from the Flow area into the right viewer area of Fusion Studio.
The Fusion Studio preview window now shows the clip with noise reduction applied to it:
2.4. Render the video
To apply Neat Video noise reduction
- Use the output of the ReduceNoise v4 node in your project further.
You can now use the output of the ReduceNoise v4 node in your further workflow within the project. The noise reduction is automatically applied to the video data produced by that node.
Please see the User Guide (Win) and User Guide (OS X) for more details about adjusting the filter settings and other aspects of using Neat Video. These Video Tutorials will also help you to get the most out of Neat Video noise reduction.