Neat Video community Forum Index
www.neatvideo.com
Neat Video community
support - help - questions and answers - sharing experience and opinions - feedback - suggestions - backup contact
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Odd Timing Error

 
Post new topic   Reply to topic    Neat Video community Forum Index -> Bugs, issues
View previous topic :: View next topic  
Author Message
Chris Attkins



Joined: 23 Sep 2010
Posts: 4

PostPosted: Thu Sep 23, 2010 12:58 pm    Post subject: Odd Timing Error Reply with quote

I'm a new user and delighted with this magical plug-in, which works perfectly on nearly everything to which I have applied it. However a strange oddity has me stumped today.
I have HD footage from five cameras on my FC 6 timeline, one stream from a Sony Cyber-shot. This is something of a cheat since it records AVCHD at 1080 x 60i and cannot therefore be properly conformed via my Matrox Mini to match the other four streams at 720 x 50p. However, with a little slippage to keep it in sync, all worked fine for the first hour of material, including the application of NV where necessary.
However, when I apply NV to the later Cybershot clips, these adopt entirely different in and out points visually, although the logging information does not change!
I appreciate this has to be a problem with my transcoding, rather than a bug in NV, but am hoping someone may be able to tell me how to overcome this issue.
Back to top
View user's profile Send private message
NVTeam



Joined: 01 Sep 2005
Posts: 2237

PostPosted: Thu Sep 23, 2010 1:30 pm    Post subject: Re: Odd Timing Error Reply with quote

Chris Attkins wrote:

However, when I apply NV to the later Cybershot clips, these adopt entirely different in and out points visually, although the logging information does not change!

Perhaps I misunderstand the problem, but do you make sure NV is applied to the right clips? Do you click the clip before adding NV and adjusting NV setting? Then does NV show the correct frame in its internal viewer?

Vlad
_________________
Neat Video team
noise reduction for video and photos
Back to top
View user's profile Send private message Visit poster's website
Chris Attkins



Joined: 23 Sep 2010
Posts: 4

PostPosted: Thu Sep 23, 2010 3:21 pm    Post subject: Reply with quote

Thanks for your prompt response Vlad.

Yes, it was the action of applying NV to specific clips that caused the shift in footage, but I have in the meantime done some further experiments re-encoding the raw footage. I discovered the problem is caused by an incorrect setting when capturing the clips: it seems that setting the capture depth to 8 bits instead of 10 causes all sorts of problems!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Neat Video community Forum Index -> Bugs, issues All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group