Using profiles from v2.6 on v3

questions about practical use of Neat Video, examples of use
Post Reply
Kakeru
Posts: 4
Joined: Mon Aug 25, 2008 7:49 am

Using profiles from v2.6 on v3

Post by Kakeru »

Hi! I came across a problem as I upgraded to v3 for the VirtualDub Pro plug-in yesterday.

I was trying to use a profile I used for an anime I wanted to encode from v2.6 but for some reason I keep getting some weird artifacts while trying to use it on v3 and they are not there when I go back and use v2.6 using the same source and profile. Is there anyway I could load my profile on v3 without any problems?

http://imageshack.us/f/831/newvd.png/

The screencap on the left is the original and the right is the new filtered using v3 of neat video.
NVTeam
Posts: 2745
Joined: Thu Sep 01, 2005 4:12 pm
Contact:

Post by NVTeam »

Perhaps it simply requires some minor adjustment of the filter (the noise levels). Or try to re-build (or Auto Fine-Tune) the profile in v3 to make it more accurate.
Remember that v3 used a modified filter, so the results may generally be different than in v2. Usually, the results are better but this depends on the filter settings too.

I would try to re-build the profile in v3 and then adjust the filter to make preview look good.

Vlad
Post Reply